• Home /
• Industrial Automation /
• Robotics /
• Robot Parts and Accessories

Have a question? Call us now at +91 9650660070

Robot Parts And Accessories

Showing 40 out of 475 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 24 hrs

TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size, 0624XOJ5C6W

By TECHDELIVERS

Pack of 10 piece

₹140   ₹299

You save ₹159!

53.18% OFF

The TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size . Transfer paper is commonly used in the process of making DIY PCBs at home. The transfer paper method allows you to transfer the circuit design from a printed image onto a copper-clad PCB board, which is then etched to create the desired PCB circuit. Here's a step-by-step guide to the transfer paper method for creating a PCB: Materials Needed:
1. Copper-clad PCB board
2. Circuit design printed on regular paper using a laser printer (mirrored/flipped horizontally)
3. Transfer paper (also known as iron-on transfer paper or toner transfer paper)
4. Iron
5. Etching solution (such as ferric chloride or ammonium persulfate)
6. Plastic container for etching
7. Rubber gloves
8. Fine sandpaper or abrasive pad
9. Safety goggles Steps: 1. Circuit Design: Create or download the desired circuit design using PCB design software. Print the circuit design on regular paper using a laser printer. The design should be mirrored or flipped horizontally, as it will be transferred to the copper side of the PCB. 2. Preparing the Copper Board: Cut the copper-clad PCB board to the desired size for your circuit. Clean the copper surface thoroughly with fine sandpaper or an abrasive pad to remove any oxidation or impurities. 3. Preparing the Transfer Paper: Cut the transfer paper to the size of the PCB board. Place the printed side of the transfer paper (with the circuit design) onto the cleaned copper surface. Ensure that the toner side is in contact with the copper surface. 4. Heat Transfer: Preheat the iron to a medium-high setting (without steam). Place the iron on top of the transfer paper and apply even pressure while moving the iron in a circular motion. Make sure to cover the entire circuit design area. Apply heat for about 2-3 minutes. 5. Cooling and Peeling: Allow the transfer paper to cool down for a few minutes. Once cool, gently peel off the transfer paper. The toner from the paper should now be transferred onto the copper surface. 6. Etching: Wear rubber gloves and safety goggles for this step. Prepare the etching solution in a plastic container according to the manufacturer's instructions. Submerge the copper-clad board with the toner in the etching solution. Agitate the container gently to ensure even etching. The etching process will remove the exposed copper areas, leaving the printed circuit behind.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS PCB Toner Transfer Paper, Glossy Paper Size A4

By TECHDELIVERS

Pack of 50 piece

₹494 - ₹494

You save ₹205!

29.33% OFF

TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a specialized printing medium designed for creating high-quality printed circuit board (PCB) layouts with ease and precision. This paper is specifically engineered for use in the toner transfer method, a popular technique used by electronics enthusiasts and professionals for transferring circuit designs onto copper-clad boards.The glossy finish of the paper ensures crisp and clear printing of PCB designs, allowing for intricate details and fine traces to be accurately reproduced. The A4 size is a standard dimension that provides ample space for printing multiple circuit designs on a single sheet, maximizing efficiency and reducing waste during the PCB fabrication process.One of the key advantages of TECHDELIVERS PCB Toner Transfer Paper is its compatibility with laser printers and copiers commonly found in home offices and professional work environments. This compatibility ensures that users can easily print their circuit designs directly onto the transfer paper without the need for specialized printing equipment.The paper's heat-resistant properties are crucial for the toner transfer method, where the printed circuit design is transferred from the paper onto a copper-clad board using heat and pressure. TECHDELIVERS PCB Toner Transfer Paper can withstand the high temperatures required for successful toner transfer, ensuring reliable and consistent results.Moreover, the glossy surface of the paper facilitates smooth toner transfer onto the copper surface of the PCB, minimizing the risk of smudging or smearing during the transfer process. This contributes to the overall quality and accuracy of the transferred circuit pattern, making it easier for users to etch and create functional PCBs.Overall, TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a reliable and efficient solution for creating professional-grade PCB layouts using the toner transfer method. Its compatibility with laser printers, heat-resistant properties, and glossy finish make it an essential tool for electronics enthusiasts, hobbyists, and professionals involved in PCB prototyping and fabrication.

Type of Product : PCB toner transfer paper

Sheet Size : A4

Paper Finish : Glossy

Explore other Variants (1)

Ships within 24 hrs

TECHDELIVERS Copper Clad Board for PCB making Single Sided, Phenolic

By TECHDELIVERS

₹247 - ₹247

You save ₹1,752!

87.64% OFF

The TECHDELIVERS Copper Clad Board for PCB making is a single-sided phenolic board specifically designed for creating custom printed circuit boards (PCBs) in electronic projects. This type of board is commonly used by hobbyists, electronics enthusiasts, and professionals who need a reliable substrate for assembling and soldering electronic components.The key feature of the TECHDELIVERS Copper Clad Board is its construction using a phenolic resin substrate with a thin layer of copper laminated onto one side. The copper layer serves as the conductive trace material for creating circuit pathways, while the phenolic substrate provides structural support and insulation between the copper traces.One of the advantages of using a single-sided copper clad board is its simplicity and affordability, making it ideal for prototyping and small-scale projects. The single-sided design means that components and traces are only soldered onto one side of the board, simplifying the assembly process and reducing complexity.The copper layer on the board is typically pre-etched with a copper pattern or grid, providing a template for creating custom circuit designs. Users can use etching techniques such as chemical etching or mechanical milling to remove unwanted copper and create the desired circuit layout.The TECHDELIVERS Copper Clad Board is also designed with convenience in mind. It comes in standard sizes and thicknesses, making it compatible with common PCB design software and fabrication techniques. This standardization ensures compatibility with drill sizes, component placements, and soldering processes.

Suitable For : PCB making Single Sided

Type of Product : Copper Clad Board

Material : Phenolic

Care Instructions : Always use mask while cutting PCBs

Explore other Variants (1)

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making

By TECHDELIVERS

₹258   ₹559

You save ₹301!

53.85% OFF

The TECHDELIVERS Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making - 500 g, also known as etchant or etching solution, is a chemical substance used in the process of creating printed circuit boards (PCBs). PCB etching is a method of removing unwanted copper from the surface of a copper-clad PCB substrate to create circuit traces, pads, and other conductive features. PCB Etching Powder: Chemical Composition: PCB etching powder typically consists of a mixture of chemicals that can dissolve or react with copper, effectively etching away the unwanted copper from the substrate. Selective Etching: The etchant selectively removes copper while leaving behind the protective mask that defines the circuit pattern. This allows for precise creation of conductive pathways on the PCB. Etching Process: The PCB is coated with a resist material (such as photoresist) that protects the areas where the circuit traces and pads are intended. The PCB is then submerged or brushed with the etching solution. The etchant removes copper from the exposed areas, leaving the desired circuit pattern. Safety Considerations: PCB etching solutions can contain corrosive and potentially harmful chemicals. Proper safety precautions, such as wearing protective gear and working in a well-ventilated area, are essential when using etchants. Common Types of PCB Etching Solutions: Ferric Chloride (FeCl3): One of the most common etchants, ferric chloride is corrosive and reacts with copper to dissolve it. Cupric Chloride (CuCl2): Cupric chloride is used as an alternative to ferric chloride and offers faster etching times. Ammonium Persulfate (NH4)2S2O8): This etchant is less corrosive compared to ferric chloride and is often used for more delicate applications. Sodium Persulfate (Na2S2O8): Similar to ammonium persulfate, sodium persulfate is a milder etchant suitable for fine-pitch traces and sensitive components. Using PCB Etching Powder: Prepare the PCB: Apply a resist material (photoresist, for example) to the PCB surface. The resist protects the areas you want to keep. Expose the Circuit Pattern: Expose the resist to light or use other methods to create the desired circuit pattern. Develop the Resist: Develop the exposed resist to remove unwanted portions, leaving the circuit pattern intact. Etching: Submerge the PCB in the etching solution. Agitate or brush the solution over the surface to speed up the process. Rinse and Neutralize: Once the desired copper has been etched away, rinse the PCB thoroughly with water to remove any remaining etchant. Neutralize the etchant to make it safe for disposal. Remove the Resist: Strip the remaining resist material from the PCB using appropriate methods.

Add to Cart Buy Now

Related Searches

jflo robot parts and accessories

pisco robot parts and accessories

invento robot parts and accessories

rs pro robot parts and accessories

hammond robot parts and accessories

Ships within 24 hrs

TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine, 0308YHUZIH7

By TECHDELIVERS

₹306   ₹399

You save ₹93!

23.31% OFF

The TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine refers to a type of electric motor that is connected to a fan blade. The motor's primary purpose is to rotate the fan blade and create airflow or ventilation. This setup is commonly found in various appliances and equipment where cooling or air circulation is essential. Here's how the motor with a fan blade typically works: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. In this context, it's usually an electric motor designed to rotate the fan blade. The motor can be of different types, such as AC (alternating current) or DC (direct current), depending on the application. 2. Fan Blade: The fan blade is a component with curved or angled surfaces that are designed to move air when rotated. The blade is connected to the shaft of the motor, so when the motor spins, it also drives the fan blade to rotate. 3. Housing: The motor and fan blade assembly is usually housed in a protective casing or housing. The housing provides structural support, protection, and helps guide the airflow generated by the rotating fan blade. Applications of motors with fan blades include: 1. Cooling Fans: These are commonly found in electronic devices, computers, laptops, and other equipment to dissipate heat and prevent overheating. 2. HVAC Systems: Heating, Ventilation, and Air Conditioning systems use motors with fan blades to circulate air and maintain indoor comfort. 3. Household Fans: Ceiling fans, pedestal fans, table fans, and other types of fans in households use this configuration for air circulation. 4. Automotive Cooling Fans: In vehicles, motors with fan blades are used in cooling fans for the engine and air conditioning system. 5. Industrial Fans: Large industrial fans used for ventilation, air circulation, and cooling purposes also use this setup. The motor with a fan blade is a practical and efficient way to move air and provide cooling in various applications. The size and power of the motor, as well as the design of the fan blade, are tailored to the specific requirements of the device or system in which it is used.

Add to Cart Buy Now

Ships within 24 hrs

Invento ISC 235 Small Loudspeaker Stereo Audio Speaker 2040 4Ohm 2W for Laptop DIY Projects Replace

By Invento

₹353   ₹590

You save ₹237!

40.17% OFF

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque, 1118V43ZQ34

By TECHDELIVERS

₹199   ₹499

You save ₹300!

60.12% OFF

The TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque is a system that combines three main components: a motor, a turbine, and a generator. This setup allows for the conversion of mechanical energy into electrical energy. The process involves using the motor to drive the turbine, which, in turn, rotates the generator to produce electricity. Here's how each component works in the motor turbine generator system: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. It provides the initial rotational force required to drive the turbine. 2. Turbine: The turbine is a machine with blades or buckets that rotate when subjected to a fluid (gas or liquid) flow. In the context of a motor turbine generator, the turbine is connected to the motor's shaft and rotates when the motor is powered on. 3. Generator: The generator is an electrical device that converts mechanical energy (rotational motion) into electrical energy (electricity). As the turbine rotates, it drives the generator, causing the generation of electricity through electromagnetic induction. The motor turbine generator system is commonly used in various applications, such as: 1. Power Plants: In some power plants, particularly in hydroelectric power plants, water turbines are driven by electric motors to generate electricity. 2. Wind Turbines: In wind power systems, the motor is used to initiate the rotation of the turbine, which harnesses the kinetic energy of the wind and drives the generator to produce electrical power. 3. Gas Turbines: In some gas turbine power plants, electric motors are used to start the initial rotation of the gas turbine before it begins generating power on its own. 4. Experimental Setups: Motor turbine generator systems are also used in educational and experimental setups to demonstrate the principles of energy conversion and electrical generation. It's important to note that in many cases, the motor turbine generator system may be a part of a larger complex power generation system. The choice of the motor, turbine, and generator components depends on the specific application, power requirements, and efficiency considerations.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, 1013UZ7UGG0

By TECHDELIVERS

Bottle of 500 gram

₹282   ₹499

You save ₹217!

43.49% OFF

The TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, a chemical sorcerer in the world of electronics, emerges as a transformative solution that shapes the pathways of innovation. This unassuming concoction wields the power to carve intricate designs onto copper-clad circuit boards, giving birth to the intricate patterns that underlie modern technology. Designed with precision and reactivity, a PCB etching agent performs a delicate dance of chemical reactions. It selectively removes unwanted copper from the surface of a circuit board, leaving behind the pathways that guide electrical currents. It's a conductor of transformation, turning raw copper into meticulously designed circuitry. In the realm of circuit board production, a PCB etching agent is the master of detail, bringing complex designs to life. It transforms flat sheets of copper into functional works of art, connecting components and enabling the flow of information and power that powers our devices. With an eye for precision, a PCB designer employs the etching agent to create connections that dictate the functionality of a circuit. It's a tool that breathes life into the dreams of engineers, artists, and innovators, allowing their visions to materialize as tangible pathways of possibility. Beyond its functional prowess, a PCB etching agent stands as a symbol of controlled creativity. It's the fusion of chemistry and technology, where the controlled application of science yields results that spark progress. In its transformative power, it embodies the essence of design, intricacy, and the ever-evolving journey of human ingenuity. In the realm of innovation, a PCB etching agent is the silent collaborator that forges the connections that drive our digital lives. It's the alchemical blend that turns copper into circuits and circuits into devices, leaving an indelible mark on the tapestry of technology.

Add to Cart Buy Now

Ships within 5 days

Invento F450 Quadcopter DIY Kit - F450 Frame + BLDC + 30A ESC + 1045 Propellor

By Invento

Pack of 1 piece

₹6,253 - ₹7,079

You save ₹5,901!

45.46% OFF

The Invento F450 Quadcopter DIY Kit is a comprehensive drone assembly package designed for building and developing quadcopter platforms for educational, experimental, and aerial robotics applications. The kit includes an F450 quadcopter frame, brushless DC (BLDC) motors, 30 A electronic speed controllers (ESCs), and 1045 propellers, providing the essential mechanical and propulsion components required for a four-rotor aircraft setup. The F450 frame offers a lightweight yet durable structure, while the BLDC motors and ESCs work together to deliver efficient power transmission and stable rotor control. The included 1045 propellers are designed to support balanced thrust generation for smooth flight performance. Suitable for drone development, robotics projects, STEM education, flight-control experimentation, aerial vehicle prototyping, and DIY engineering applications, the Invento F450 Quadcopter DIY Kit serves as a foundation for building custom unmanned aerial systems. It can be integrated with compatible flight controllers, batteries, radio systems, and sensors to create a complete quadcopter platform. Designed for engineers, students, hobbyists, educators, and developers, this kit is ideal for learning environments, research activities, prototype development, and drone technology projects. The combination of the F450 frame, BLDC motors, 30 A ESCs, and 1045 propellers provides a practical solution for assembling and exploring multi-rotor aircraft systems.

Type of Product : Parts & Accessories

Features : Bullet connectors soldered on ESC and BLDC Motor for easy connection

Explore other Variants (4)

Ships within 5 days

Invento EN31 Rustproof Steel Smooth 5 mm Rod ISC 1931-C (Pack of 10)

By Invento

Pack of 10 piece

₹943 - ₹1,769

The "Invento 10pcs EN31 Rustproof Steel Smooth Rod 5 mm Length 100-200 mm" is a package containing 10 smooth rods made from EN31 rustproof steel, each with a diameter of 5mm and a length ranging from 100mm to 200mm. Here's a detailed overview:
Material: The rods are manufactured from EN31 rustproof steel. EN31 steel is well-known for its high strength, hardness, and resistance to corrosion, making it suitable for applications where durability and longevity are crucial, especially in environments prone to rust and corrosion.
Smooth Rods: These rods feature a smooth surface finish without any threading or grooves. Smooth rods are commonly utilized in applications requiring linear motion, such as in 3D printers, CNC machines, robotics, and other mechanical systems. They are often paired with linear bearings or bushings to enable smooth and precise movement.
Quantity: The package includes 10 smooth rods, providing a convenient solution for projects that necessitate multiple rods or for keeping spare parts on hand.
Diameter: Each rod has a diameter of 5mm, which is a standard size for smooth rods used in various applications.
Length Range: The length of each rod ranges from 100mm to 200mm, offering flexibility to accommodate different project requirements. This range allows users to select the appropriate rod length based on their specific needs.

Type of Product : Parts & Accessories

Material : EN-31 (Hard Chromed)

Explore other Variants (3)

Ships within 3 days

Invento ISC 651-2 1.5 LPMAir Vacuum Piston Pump for DIY Projects

By Invento

Pack of 4 piece

₹3,421   ₹6,372

You save ₹2,951!

46.31% OFF

Add to Cart Buy Now

Ships within 5 days

Invento 260mA Mini DC Air Pump ISC 1613

By Invento

Pack of 4 piece

₹388 - ₹518

You save ₹308!

37.29% OFF

The Invento 260mA Mini DC Air Pump ISC 1613 is a compact and efficient air pump designed for a variety of applications where space and power constraints are a concern. With a nominal current of 260mA and operating on a DC power supply, this mini air pump provides reliable and consistent air flow in a small, portable package. It is ideal for use in aquariums, small ventilation systems, and other low-power air movement needs. The ISC 1613 features a robust construction that ensures durability and long-term performance. Its compact design makes it suitable for installation in tight spaces where traditional pumps might be too large. Despite its size, the pump delivers a commendable air flow rate, making it a versatile choice for both hobbyist and professional applications. The air pump operates quietly, minimizing noise disruption while providing efficient air circulation. It is easy to install and maintain, with user-friendly connections and minimal maintenance requirements. The device is engineered to handle continuous operation, making it reliable for ongoing use in various environments. The Invento Mini DC Air Pump ISC 1613 is a practical solution for applications requiring a small yet powerful air pump. Its combination of efficiency, durability, and compact size makes it an excellent choice for enhancing air flow in confined spaces and specialized settings.

Flow Rate : 0.3L/min

Voltage : 3V - 6V DC

Type of Product : Mini DC Air Pump

Current : 260mA

Size : 48 x 27 x 12 mm

Pressure : 30KPa

No-Load Testing Paramete : 3v 130ma, 300mmhg

Explore other Variants (3)

Ships within 3 days

Invento 2 mm Hole Dia Aluminium Alloy Sheet for DIY Project

By Invento

₹884 - ₹1,887

You save ₹1,417!

42.89% OFF

The Invento 2 mm Hole Diameter Aluminium Alloy Sheet is an essential material for a wide range of DIY projects, offering both durability and versatility. Crafted from high-quality aluminium alloy, this sheet is designed to meet the needs of hobbyists and professionals alike, making it ideal for custom fabrication, crafting, and repair work. With a precise 2 mm hole diameter, the sheet features a series of evenly spaced perforations that enhance its adaptability for various applications. The perforations allow for easy integration with other components, facilitating seamless assembly in projects such as custom enclosures, decorative panels, and ventilation grilles. The aluminium alloy construction provides a strong yet lightweight material, ensuring that the sheet maintains its structural integrity while remaining manageable and easy to work with. The sheet's aluminium alloy composition also offers excellent resistance to corrosion, making it suitable for use in both indoor and outdoor environments. Its smooth surface can be easily painted, anodized, or finished to match aesthetic preferences or functional requirements. Additionally, the material's inherent thermal and electrical conductivity makes it a practical choice for projects involving heat dissipation or electrical components. Whether you're constructing a bespoke piece of furniture, creating custom artwork, or building functional components, the Invento Aluminium Alloy Sheet delivers the quality and performance needed to achieve professional results. Its combination of strength, versatility, and ease of use makes it a valuable addition to any DIY enthusiast's toolkit.

Suitable For : DIY Projects

Type of Product : Aluminium Alloy Sheet

Hole Diameter : 2mm

Material : Aluminium Alloy

Package Contains : 1 pc Aluminium Alloy Sheet

Explore other Variants (2)

Ships within 3 days

Hobbywing Xrotor 20A ESC Drone Speed Controller for UAV

By Hobbywing

₹2,005  

The Hobbywing Xrotor 20A ESC is an affordable, reliable and easy to use electronic speed controller that is perfect for your multi-rotor applications. The Xrotor ESC is small yet powerful, and can handle 2S-4S LiPo batteries without any problems. The Xrotor has a built-in BEC that provides 5V to power the receiver and servos, so there's no need for additional components or wiring for them.The Xrotor 20A ESC is also very easy to program. You can set the desired battery voltage and the number of cells you are using (2S-4S) using dip switches, which means you don't have to go through the hassle of hooking up a computer to reprogram it every time you want to change your battery configuration. The Xrotor ESC also comes with an LED display that shows you the battery voltage under load, so you can keep track of your battery health.The Xrotor 20A ESC can handle up to 3S LiPo/LiFe batteries, and comes with a barrel jack connector for an external BEC. The input voltage range is 6 – 15V, which means it can be powered by 2-3s LiPo, a 3s LiFe battery, or even 4s LiPo with a step down converter.For most applications, an external BEC is not necessary. If you want to use an external BEC though, Hobbywing offers an optional one on their site. The stock BEC will do just fine for powering servos.As far as programming goes, this ESC has all of the features you'd expect from a modern speed controller. There are three timing modes: Multiwii/Airplane mode (1-2ms), Multiwii/Heli mode (2-4ms), and Multiwii/Climb mode (2-7ms). It also has two programmable mixes: one between throttle and pitch channel.

Add to Cart Buy Now

Ships within 3 days

Hobbywing XRotor-40A ESC Drone Speed Controller

By Hobbywing

₹3,421  

Hobbywing XRotor-40A ESC is a great item that is made by Hobbywing. The UAV battery is the ideal power solution for all of your applications where performance, endurance, and reliability are critical.Hobbywing XRotor-40A ESC is a popular ESC for the price, but it has some downsides that might make other models better for your needs. It works well for small to medium sized cars, and is capable of handling up to a 2S battery. The throttle curves are available in four different options, but you can only change them with the solderless method.Hobbywing XRotor-40A ESC is the first and only 30A 2-6S BLHeli_S ESC in the market. It's a feature packed, micro sized, light weight, high performance speed controller especially designed for multi-rotor racing drones.The Hobbywing XRotor-40A is based on the latest BLHeli_S firmware (1.16) and uses hardware generated PWM for smooth throttle response. It has DSHOT1200 built in for fast response to fast throttle input signal. The hardware generated PWM signals are also used to increase motor life span and reduce heat buildup. The Hobbywing XRotor-40A ESC comes with a current sensor (0~3.3A) sensor rated at IPEX connector. The high performance MCU of the Hobbywing XRotor-40A can handle all types of flight controllers and it also supports Telemetry which is a must have for racing drone applications.

Add to Cart Buy Now

Ships within 3 days

EASY ELECTRONICS Development Board Ultra-Low Power Consumption Dual Core For ESP-32, ESP-32S

By EASY ELECTRONICS

₹907  

The Easy Electronics ESP-32 Development Board, a powerful and versatile platform for your IoT projects. This development board is based on the ESP-32 microcontroller, which offers dual-core processing, ultra-low power consumption, and built-in Wi-Fi and Bluetooth connectivity. The Easy Electronics ESP-32 Development Board is designed to provide seamless integration and exceptional performance. The dual-core processor allows for parallel execution of tasks, enabling efficient multitasking and faster response times. This makes it ideal for applications that require real-time data processing and complex computations. One of the key features of the ESP-32 microcontroller is its ultra-low power consumption. It is designed to operate in low-power modes, making it suitable for battery-powered applications and energy-efficient projects. With its advanced power management features, you can optimize the power consumption of your devices and extend the battery life. The development board is equipped with onboard Wi-Fi and Bluetooth modules, allowing for easy connectivity to the internet and other devices. You can effortlessly connect to wireless networks, send and receive data, and communicate with other devices using the built-in protocols. This opens up a world of possibilities for creating IoT applications, home automation systems, and wireless sensor networks. The Easy Electronics ESP-32 Development Board provides an array of input and output options, including digital I/O pins, analog inputs, PWM outputs, and more. This allows for seamless integration with a wide range of sensors, actuators, and peripheral devices. Whether you're measuring environmental parameters, controlling motors, or interfacing with displays, this development board offers the flexibility you need. Programming the ESP-32 Development Board is straightforward, thanks to its compatibility with the Arduino development environment. You can easily write code using familiar Arduino syntax and leverage the extensive library support available. Additionally, the development board features a USB interface for easy programming and debugging.

Add to Cart Buy Now

Ships within 3 days

Invento Smooth Nylon Rod 10 mm Outer Diameter Natural White, ISC 2089 (Rod Length: 250mm - 1000mm)

By Invento

Pack of 10 piece

₹294 - ₹1,769

You save ₹831!

31.95% OFF

The Invento Smooth Nylon Rod ISC 2089 is a versatile engineering material designed for mechanical fabrication, structural support, and prototype development applications. Manufactured from high-quality nylon, this rod features a smooth surface finish and a 10 mm outer diameter, providing excellent wear resistance, low friction characteristics, and reliable dimensional stability. The natural white nylon construction combines durability with lightweight performance, making it suitable for applications where strength, reduced weight, and smooth operation are important. Available in rod lengths ranging from 250 mm to 1000 mm, it offers flexibility for a variety of machining, fabrication, and assembly requirements. Suitable for robotics projects, automation systems, DIY engineering applications, educational models, machine components, and custom mechanical assemblies, the ISC 2089 nylon rod can be used for shafts, spacers, rollers, guides, supports, bushings, and fabricated structural parts. It can be machined, drilled, cut, and adapted for use in prototype development, research projects, and industrial applications where lightweight and wear-resistant materials are required. Designed for engineers, technicians, students, hobbyists, and developers, this nylon rod supports a broad range of educational, experimental, and manufacturing projects. Its smooth finish, 10 mm diameter, and multiple length options make it a practical choice for applications requiring durable, low-maintenance, and lightweight engineering materials.

Type of Product : Smooth Nylon Rod

Color : Natural White

Material : Nylon

Shape : Cylindrical

Outer Diameter : 10 mm

Ideal For : DIY Projects

Explore other Variants (18)

Ships within 6 days

Invento Trapezoidal Lead Screw T8 8mm Pitch 2mm Lead 8 TR8

By Invento

Pack of 1 piece

₹2,831 - ₹3,421

The Invento 300mm Trapezoidal Lead Screw. Featuring a T8 trapezoidal thread profile, 8mm pitch, and 2mm lead, this lead screw provides smooth and precise linear motion in your projects. Whether you're building CNC machines, 3D printers, or automation systems, this lead screw ensures accurate positioning and reliable performance. With its durable construction and precise machining, it's perfect for demanding applications in manufacturing, prototyping, and robotics.

Type of Product : Parts & Accessories

Explore other Variants (4)

Ships within 6 days

Invento DJI Naza-M V2 MultiRotor Flight Stabilization Controller with GPS Set ISC 934

By Invento

Pack of 1 piece

₹35,399   ₹47,200

You save ₹11,801!

25% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 80x200mm Plastic Nylon Cable Drag Chain 1000mm (1mtr)

By Invento

Pack of 1 piece

₹25,959  

Add to Cart Buy Now

Ships within 6 days

Invento 30 A BLDC Brushless Motor ISC 1493-2

By Invento

Pack of 2 piece

₹2,831 - ₹10,029

The Invento 30 A BLDC Brushless Motor ISC 1493-2 is a high-performance motor designed for various applications requiring efficient and reliable power. This motor is ideal for use in drones, electric vehicles, robotics, and other precision engineering projects. It features a brushless design, which significantly reduces maintenance needs and enhances durability compared to traditional brushed motors. Key specifications of the ISC 1493-2 include a maximum current rating of 30 A, ensuring it can handle substantial power loads. The motor operates at a high efficiency, which translates to longer battery life and improved overall performance in your applications. Its compact and lightweight construction makes it an excellent choice for projects where space and weight constraints are critical. The ISC 1493-2 also boasts a high torque-to-weight ratio, providing robust performance even under heavy loads. Its precise engineering allows for smooth and consistent operation, minimizing vibrations and noise during use. This makes it suitable for applications requiring a high degree of control and stability. Additionally, the motor is equipped with advanced cooling features to prevent overheating, ensuring reliable operation over extended periods. The high-quality materials and construction of the ISC 1493-2 guarantee long-term reliability and durability, making it a cost-effective solution for demanding projects. In summary, the Invento 30 A BLDC Brushless Motor ISC 1493-2 combines high efficiency, robust performance, and durable construction, making it an excellent choice for a wide range of applications in modern engineering and technology.

Type of Product : BLDC Brushless Motor

Shaft Diameter : 3.17 mm

ESC : 30 A

Motor KV : 2000 KV

Features : Soldered Bullet connectors to motor and esc for easy connection

Country of Origin : India

Explore other Variants (3)

Ships within 6 days

Invento 40A BLDC Brushless Motor ISC 1492-5

By Invento

Pack of 2 piece

₹3,539 - ₹11,445

The Invento 40A BLDC Brushless Motor ISC 1492-5 is a high-performance motor designed for a variety of applications, including drones, RC vehicles, and industrial automation. With a current capacity of 40A, this motor provides robust power and efficiency, making it ideal for demanding tasks that require precise control and high torque. The ISC 1492-5 model features advanced brushless technology, which enhances its lifespan and reduces maintenance requirements compared to traditional brushed motors. Its design ensures smooth and reliable operation, with minimal heat generation and noise, making it suitable for both indoor and outdoor use. This motor boasts a compact and lightweight construction, which is essential for applications where weight and space are critical factors. Despite its small size, the Invento 40A BLDC motor delivers impressive performance, offering a high power-to-weight ratio. It is engineered to provide consistent and stable power output, ensuring optimal performance across various load conditions. The motor is equipped with high-quality bearings and components, ensuring durability and longevity. It also features a precision-balanced rotor, which reduces vibrations and contributes to smoother operation. The ISC 1492-5 is compatible with a wide range of electronic speed controllers (ESCs), making it versatile and easy to integrate into existing systems. Ideal for hobbyists and professionals alike, the Invento 40A BLDC Brushless Motor ISC 1492-5 combines efficiency, reliability, and performance, making it a top choice for those seeking a dependable motor solution for their projects. Whether you are building a high-speed drone or a sophisticated robotic system, this motor is designed to meet your needs with excellence.

Type of Product : BLDC Brushless Motor

Shaft Diameter : 3.17 mm

ESC : 40 A

Motor KV : 1600 KV

Features : Soldered Bullet connectors to motor and esc for easy connection

Country of Origin : India

Explore other Variants (3)

Ships within 6 days

Invento 30 A BLDC Brushless Motor ESC ISC 1492-2

By Invento

Pack of 1 piece

₹3,067 - ₹10,029

The Invento 30 A BLDC Brushless Motor ESC ISC 1492-2 is a highly efficient and reliable electronic speed controller designed for brushless DC motors. Ideal for various applications such as drones, RC cars, and robotics, this ESC ensures optimal performance and precise control. It supports a continuous current of 30A, making it suitable for medium to high-power setups. One of the standout features of the ISC 1492-2 is its robust design, which includes high-quality components and advanced firmware for smooth and responsive throttle control. The ESC is equipped with multiple safety features such as over-current protection, over-temperature protection, and low-voltage cut-off, ensuring the longevity and safety of both the ESC and the motor. The ISC 1492-2 offers versatility with its programmable settings, allowing users to fine-tune parameters such as brake force, timing, and acceleration to match their specific needs. It supports a wide input voltage range, typically from 6V to 22V (2S-6S LiPo batteries), making it adaptable to various power sources. Installation is straightforward, thanks to its compact and lightweight design. The ESC comes with pre-soldered connectors and clear labeling for easy wiring. Additionally, it features a built-in BEC (Battery Eliminator Circuit) that provides a stable 5V output to power the receiver and other onboard electronics, eliminating the need for a separate power source. Overall, the Invento 30 A BLDC Brushless Motor ESC ISC 1492-2 is a reliable and efficient choice for enthusiasts and professionals seeking precise motor control, enhanced performance, and robust safety features for their brushless motor applications.

Type of Product : BLDC Brushless Motor

Shaft Diameter : 3.17 mm

ESC : 30 A

Motor KV : 1600 KV

Explore other Variants (3)

Ships within 6 days

Invento 40A BLDC Brushless Motor ISC 1493-5

By Invento

Pack of 4 piece

₹3,539 - ₹10,147

The Invento 40A BLDC Brushless Motor ISC 1493-5 is a high-performance, efficient motor designed for applications requiring reliable and smooth operation. This brushless direct current (BLDC) motor boasts a robust 40A current rating, making it suitable for demanding tasks where power and durability are essential. Its brushless design enhances longevity and reduces maintenance needs compared to traditional brushed motors, as it eliminates the friction and wear associated with brushes. The ISC 1493-5 features a compact and lightweight construction, which facilitates easy integration into various systems without adding significant weight or bulk. The motor is engineered for high efficiency, delivering optimal performance while consuming less power, which translates to energy savings and extended battery life in portable applications. This characteristic makes it ideal for use in electric vehicles, robotics, drones, and industrial automation. The motor's advanced electronic commutation system ensures precise control and smooth operation, minimizing noise and vibration. This is particularly beneficial in applications requiring accurate movement and quiet performance. Additionally, the ISC 1493-5 is designed with high-quality materials and advanced cooling systems to handle extended use and high-temperature environments without compromising performance. Overall, the Invento 40A BLDC Brushless Motor ISC 1493-5 is a versatile and reliable choice for a wide range of high-power applications, providing exceptional efficiency, durability, and precision. Its advanced features make it an excellent option for demanding industrial and commercial uses.

Type of Product : BLDC Brushless Motor

Shaft Diameter : 3.17 mm

ESC : 40 A

Motor KV : 2000 KV

Explore other Variants (3)

Ships within 6 days

Invento 40A BLDC Brushless Motor ISC 1492-4

By Invento

Pack of 2 piece

₹3,421 - ₹10,973

The Invento 40A BLDC Brushless Motor ISC 1492-4 is a high-performance motor designed for a variety of applications, including drones, electric vehicles, robotics, and industrial machinery. This motor offers a maximum continuous current of 40A, ensuring robust power delivery and efficiency for demanding tasks. The brushless design enhances durability, reducing maintenance needs and extending the motor's lifespan compared to traditional brushed motors. With a KV rating of 1492, the ISC 1492-4 is optimized for applications requiring high-speed rotation with minimal torque ripple. This makes it ideal for precision tasks where smooth operation is critical. The motor's construction features high-quality materials, including high-temperature magnets and stator windings, ensuring reliable performance even under strenuous conditions. The ISC 1492-4 is compact and lightweight, making it suitable for integration into systems where space and weight are critical constraints. Its efficient design minimizes heat generation, thereby improving overall energy efficiency and operational reliability. Additionally, the motor supports a wide voltage range, providing versatility for various power sources. Installation is straightforward, with clearly labeled connections and robust mounting options, ensuring secure attachment and easy integration into your projects. The motor's performance can be further enhanced by pairing it with compatible electronic speed controllers (ESCs) to achieve precise control over speed and torque. Overall, the Invento 40A BLDC Brushless Motor ISC 1492-4 is a versatile and reliable choice for professionals and hobbyists alike, offering high efficiency, durability, and performance for a wide range of applications.

Type of Product : BLDC Brushless Motor

Application : Quadcopter, Airplane, Helicopters, DIY Projects

Shaft Diameter : 3.17 mm

ESC : 40 A

Motor KV : 1600 KV

Features : Soldered Bullet connectors to motor and esc for easy connection

Country of Origin : India

Name of Manufacturer/Packer/Importer : Invento India Ltd.

Explore other Variants (3)

Ships within 6 days

Invento 40A BLDC Brushless Motor ISC 1493-4

By Invento

Pack of 1 piece

₹3,421 - ₹11,209

The Invento 40A BLDC Brushless Motor ISC 1493-4 is a high-performance motor designed for a variety of applications, including drones, electric vehicles, robotics, and other high-demand electrical systems. With a current rating of 40A, this motor delivers powerful and efficient performance, making it ideal for applications requiring reliable and sustained operation. The ISC 1493-4 model features a brushless design, which enhances its efficiency and lifespan compared to traditional brushed motors. The absence of brushes reduces friction and wear, resulting in lower maintenance requirements and longer operational life. Additionally, the brushless design contributes to quieter operation, making it suitable for noise-sensitive applications. This motor is constructed with high-quality materials, ensuring durability and robustness in demanding environments. Its compact and lightweight design allows for easy integration into various systems, without compromising on power or performance. The motor's high torque output and precise control capabilities make it ideal for applications requiring precise movements and speed control. The Invento 40A BLDC Brushless Motor ISC 1493-4 is also equipped with advanced cooling mechanisms to prevent overheating during extended use, thereby enhancing its reliability and performance. It is compatible with a wide range of electronic speed controllers (ESCs), providing flexibility in system design and integration. Overall, the Invento 40A BLDC Brushless Motor ISC 1493-4 is a versatile and reliable choice for engineers and hobbyists alike, offering high efficiency, durability, and precise control in a compact and lightweight package. Whether used in drones, electric vehicles, or robotic systems, this motor delivers consistent and powerful performance to meet the demands of modern technological applications.

Type of Product : BLDC Brushless Motor

Application : Quadcopter, Airplane, Helicopters, DIY Projects

Shaft Diameter : 3.17 mm

ESC : 40 A

Motor KV : 2000 KV

Features : Soldered Bullet connectors to motor and esc for easy connection

Country of Origin : India

Explore other Variants (3)

Ships within 6 days

Invento 70mm x 20mm Plastic Robotic Wheel Durable Rubber Tire Wheel 6mm, ISC 1602 (Pack of: 1-4)

By Invento

Pack of 4 piece

₹400 - ₹506

The Invento Plastic Robotic Wheel ISC 1602 is a durable mobility component designed for robotics, automation systems, and motorized vehicle applications. Measuring 70 mm in diameter and 20 mm in width, this wheel features a robust plastic hub paired with a durable rubber tire that provides reliable traction, stability, and smooth movement across a variety of surfaces. Designed with a 6 mm mounting interface, it is compatible with suitable shafts, geared motors, and drive mechanisms, enabling easy integration into robotic and mechanical assemblies. Its balanced size and lightweight construction make it suitable for applications requiring efficient mobility and dependable performance. Suitable for robotics projects, smart vehicles, autonomous platforms, educational kits, automation equipment, and DIY engineering applications, the ISC 1602 wheel supports controlled maneuverability and reliable motion. The rubber tire helps improve grip and reduce slippage, contributing to smoother operation and enhanced directional control. It can be incorporated into wheeled robots, remote-controlled vehicles, prototype development projects, and experimental automation systems where stable movement is essential. Designed for engineers, students, hobbyists, educators, and developers, this wheel is ideal for learning environments, testing applications, and product development activities. Available in pack quantities ranging from 1 to 4 pieces, it offers flexibility for both individual builds and complete multi-wheel robotic systems.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 20 mm

Outside Diameter : 70 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 55mm x 20mm Plastic Robotic Wheel Durable Rubber Tire Wheel 6mm, ISC 1601 (Pack of: 1-4)

By Invento

Pack of 1 piece

₹400 - ₹506

The Invento Plastic Robotic Wheel ISC 1601 is a compact and durable mobility component designed for robotics, automation platforms, and motorized vehicle applications. Measuring 55 mm in diameter and 20 mm in width, this wheel features a sturdy plastic hub combined with a durable rubber tire that provides enhanced traction, stability, and controlled movement on a variety of surfaces. Designed with a 6 mm mounting interface, the wheel is compatible with suitable shafts, geared motors, and drive mechanisms, allowing easy integration into robotic and mechanical assemblies. Its lightweight construction supports efficient motion while maintaining dependable durability for repeated use. Suitable for robotics projects, smart vehicles, educational kits, automation systems, DIY electronics, and prototype development, the ISC 1601 wheel can be incorporated into wheeled robots, autonomous vehicles, remote-controlled models, and custom motorized platforms. The rubber tire improves grip and helps reduce slippage, contributing to smoother operation and better maneuverability. Designed for engineers, students, hobbyists, educators, and developers, this wheel is ideal for learning environments, testing applications, and product development projects. Available in pack quantities ranging from 1 to 4 pieces, it offers flexibility for both individual projects and complete multi-wheel robotic systems.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 20 mm

Outside Diameter : 55 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 75mm x 13mm Plastic Robotic Wheel Durable Rubber Tire Wheel 6mm, ISC 1598 (Pack of: 1-4)

By Invento

Pack of 4 piece

₹400 - ₹506

The Invento Plastic Robotic Wheel is a compact and durable mobility component designed for robotics, automation systems, and motorized vehicle applications. Measuring 75 mm in diameter and 13 mm in width, this wheel features a sturdy plastic hub combined with a durable rubber tire that provides enhanced traction, stability, and controlled movement across a variety of surfaces. Designed with a 6 mm mounting interface, the wheel can be easily integrated with compatible shafts, motors, and drive mechanisms. Its lightweight construction supports efficient motion while maintaining the strength required for repeated operation in robotic and mechanical assemblies. Suitable for robotics projects, smart vehicles, educational kits, automation platforms, DIY electronics, and prototype development, this wheel can be incorporated into wheeled robots, autonomous vehicles, remote-controlled models, and custom motorized systems. The rubber tire improves grip and helps reduce slippage, contributing to smoother movement and better maneuverability. Designed for engineers, students, hobbyists, educators, and developers, the wheel is ideal for learning applications, testing environments, and product development projects. Available in pack quantities ranging from 1 to 4 pieces, it offers flexibility for both individual builds and multi-wheel robotic or automation systems.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 13 mm

Outside Diameter : 75 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento Plastic Robotic Track Wheel V-Pulley Durable Tire ISC 1600

By Invento

Pack of 1 piece

₹400 - ₹601

The Invento Plastic Robotic Track Wheel. Featuring a V-pulley design and a durable tire, this track wheel offers reliable performance and traction on different surfaces. Whether you're building a tracked vehicle or a conveyor system, this wheel ensures smooth movement and precise tracking, making it ideal for robotics and automation projects.

Type of Product : Robotic Track Wheel V-Pulley Durable Tire

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 18.5 mm

Outside Diameter : 65 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 70mm x 40mm Plastic Robotic Wheel Durable Rubber Tire Wheel 6mm, ISC 1599 (Pack of: 1-4)

By Invento

Pack of 2 piece

₹400 - ₹671

The Invento Plastic Robotic Wheel ISC 1599 is a durable mobility component designed for robotics, automation systems, and motorized vehicle applications. Measuring 70 mm in diameter and 40 mm in width, this wheel features a robust plastic hub paired with a durable rubber tire that provides enhanced traction, stability, and smooth movement across a variety of surfaces. The wheel is designed with a 6 mm mounting interface, allowing compatibility with suitable shafts, geared motors, and drive assemblies. Its wide profile helps improve balance and load distribution, making it suitable for mobile robotic platforms and custom mechanical systems. Suitable for robotics projects, smart vehicles, autonomous platforms, educational kits, automation equipment, and DIY engineering applications, the ISC 1599 wheel supports reliable mobility and controlled maneuverability. The rubber tire helps reduce slippage while improving grip, enabling stable movement during operation. It can be integrated into wheeled robots, remote-controlled vehicles, prototype development projects, and experimental automation systems where dependable traction and durability are required. Designed for engineers, students, hobbyists, educators, and developers, this wheel is ideal for learning applications, testing environments, and product development activities. Available in pack quantities ranging from 1 to 4 pieces, it offers flexibility for both individual builds and multi-wheel robotic assemblies.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 40 mm

Outside Diameter : 70 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 80mm x 25mm Plastic Robotic Wheel Durable Rubber Tire Wheel 6mm, ISC 1597 (Pack of: 1-4)

By Invento

Pack of 2 piece

₹577 - ₹1,651

The Invento Plastic Robotic Wheel is a durable mobility component designed for robotics, automation systems, and motorized vehicle applications. Measuring 80 mm in diameter and 25 mm in width, this wheel features a robust plastic hub paired with a durable rubber tire that enhances traction, stability, and movement control on various surfaces. The wheel is designed with a 6 mm mounting interface, allowing compatibility with suitable shafts and drive mechanisms. Its lightweight yet sturdy construction helps provide reliable performance while maintaining efficient motion in robotic and mechanical assemblies. Suitable for robotics projects, smart vehicles, educational kits, automation platforms, DIY electronics, and prototype development, this wheel can be integrated into wheeled robots, autonomous vehicles, remote-controlled models, and custom motorized systems. The rubber tire helps improve grip and reduces slippage, supporting smoother movement and better maneuverability during operation. Designed for engineers, students, hobbyists, educators, and developers, the wheel is ideal for testing environments, learning applications, and product development activities. Available in pack quantities ranging from 1 to 4 pieces, it offers flexibility for both individual projects and multi-wheel robotic or automation platforms.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 25 mm

Outside Diameter : 80 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 95mm x 20mm Plastic Robotic Wheel Durable Rubber Black Tire Wheel, ISC 1604 (Pack of: 1-4)

By Invento

Pack of 2 piece

₹400 - ₹695

The Invento Plastic Robotic Wheel ISC 1604 is a durable mobility component designed for robotics, automation platforms, and motorized vehicle applications. Measuring 95 mm in diameter and 20 mm in width, this wheel features a sturdy plastic hub combined with a durable black rubber tire that provides enhanced traction, stability, and smooth movement across a variety of surfaces. The rubber tire is designed to improve grip and reduce slippage during operation, helping to ensure reliable performance in mobile robotic systems. Its lightweight yet robust construction supports efficient motion while maintaining durability for continuous use. Suitable for robotics projects, smart vehicles, autonomous platforms, educational kits, automation systems, and DIY engineering applications, the ISC 1604 wheel can be integrated into wheeled robots, remote-controlled vehicles, prototype development projects, and custom motorized assemblies. The wheel’s larger diameter helps support smoother traversal over uneven surfaces while maintaining good maneuverability and directional control. Designed for engineers, students, hobbyists, educators, and developers, this wheel is ideal for learning environments, testing applications, and product development activities. Available in pack quantities ranging from 1 to 4 pieces, it offers flexibility for both individual builds and complete multi-wheel robotic systems.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 20 mm

Outside Diameter : 95 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 95mm x 40mm Plastic Robotic Wheel Durable Rubber Black Tire Wheel, ISC 1593 (Pack of: 1-4)

By Invento

Pack of 4 piece

₹553 - ₹1,120

The Invento Plastic Robotic Wheel is a durable motion component designed for robotics, automation, and mobile platform applications. Measuring 95 mm in diameter and 40 mm in width, this wheel features a sturdy plastic hub combined with a black rubber tire that provides enhanced grip, stability, and traction across a variety of surfaces. The rubber tread helps improve movement control while reducing slippage during operation, making the wheel suitable for robotic systems that require reliable mobility. Its robust construction supports repeated use in both educational and development environments. Suitable for robotics projects, smart vehicles, automation platforms, educational kits, DIY electronics, and prototype development, this robotic wheel can be integrated into wheeled robots, autonomous vehicles, remote-controlled models, and custom motorized systems. The combination of a lightweight plastic structure and durable rubber tire allows efficient performance while maintaining good traction and maneuverability. Designed for engineers, students, hobbyists, educators, and developers, the wheel is ideal for testing environments, learning applications, and product development projects. Available in pack quantities ranging from 1 to 4 pieces, it provides flexibility for individual builds as well as multi-wheel robotic and automation systems.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 40 mm

Outside Diameter : 95 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 110 mm x 40 mm Plastic Robotic Wheel, ISC 1603

By Invento

Pack of 2 piece

₹601 - ₹1,415

The 110 mm x 40 mm Plastic Robotic Wheel, ISC 1603, is a specialized component designed for robotic applications. Here's a brief description of its features and potential applications:
Size: The wheel has a diameter of 110 mm and a width of 40 mm, making it suitable for various robotic platforms.
Material: Constructed from durable plastic, the wheel offers a balance between strength and weight, ideal for lightweight robots.
Design: The design likely incorporates features such as treads or patterns on the surface to provide traction and stability on various surfaces.
Compatibility: It's likely designed to be compatible with standard robotic motors and axles, making it easy to integrate into different robotic systems.
Applications: The wheel can be used in various robotic applications including but not limited to:
Mobile robots
Educational robotics
Industrial automation
Prototyping projects
Benefits: Plastic wheels offer advantages such as affordability, lightweight design, and ease of customization. They are suitable for indoor use and can handle moderate loads depending on the specific design and material quality.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Wheel Thickness : 40 mm

Outside Diameter : 110 mm

Hole Size : 6 mm

Explore other Variants (3)

Ships within 6 days

Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit Metal (0.65 mm Thickness, 55 mm Wheel Diameter)

By Invento

Pack of 1 kit

₹2,123 - ₹2,123

The Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit is a versatile and durable metal chassis designed for hobbyists and DIY enthusiasts looking to build custom vehicles. Measuring 260 mm in length, 130 mm in width, and 45 mm in height, this chassis provides a stable and robust foundation for various types of model cars. Constructed from high-quality metal with a thickness of 0.65 mm, it ensures strength and resilience, capable of withstanding the rigors of operation while maintaining a lightweight profile for enhanced performance. The kit includes four wheels with a diameter of 55 mm, which are designed to provide smooth and reliable traction on various surfaces. These wheels are easy to install and offer excellent stability, making the chassis suitable for a range of applications, from basic model cars to more advanced robotics projects. The precision-cut chassis sheet allows for easy customization and modifications, enabling users to tailor the vehicle to their specific needs and preferences. The Invento chassis is ideal for educational projects, engineering experiments, and hobbyist builds, offering a practical solution for creating functional and engaging models. Its metal construction and thoughtfully designed components ensure durability and performance, making it a valuable addition to any model building toolkit. Whether you're a beginner or an experienced builder, the Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit provides the essential parts needed to bring your custom vehicle projects to life.

Voltage : 6-12 V

Type of Product : Parts & Accessories

Sheet Thickness : 0.65 mm

Wheel Thickness : 20 mm

Chassis Material : Steel (Powder Coated)

Chasis Dimension : 260x130x45mm

Shaft Diameter : 6 mm

Wheel Diameter : 55

Torque Range : 5 Kg-cm

Explore other Variants (9)

Ships within 6 days

Invento 260x130x45 mm Metal Chassis Sheet 4 Wheel Car Kit (1 mm Thickness, 5 Kg-cm Torque Range)

By Invento

Pack of 1 kit

₹2,123 - ₹2,831

The Invento 4 Wheel Car Kit. Featuring a robust metal chassis measuring 260x130x45mm and a sheet thickness of 1mm, this kit provides durability and stability for your RC car projects. With a torque range of 5 Kg-cm, it offers reliable performance and precise control, allowing you to tackle challenging terrains with ease.

Voltage : 6-12 V

Type of Product : Parts & Accessories

Sheet Thickness : 1 mm

Chassis Material : Steel (Powder Coated)

Chasis Dimension : 260x130x45mm

Shaft Diameter : 6 mm

Torque Range : 5 Kg-cm

Explore other Variants (16)

Ships within 6 days

Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit Metal (0.65 mm Thickness, 70 mm Wheel Diameter)

By Invento

Pack of 1 kit

₹2,123 - ₹2,241

The Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit is a versatile and robust metal frame designed for hobbyists and DIY enthusiasts in the world of model cars. This kit features a precision-engineered chassis made from high-quality metal with a thickness of 0.65 mm, ensuring durability and resilience under various conditions. The chassis measures 260x130x45 mm, providing ample space for assembling components while maintaining a compact and manageable size. The kit includes four wheels with a diameter of 70 mm, crafted to support smooth and stable movement of the car. These wheels are designed to fit perfectly with the chassis, allowing for an efficient and reliable driving experience. The metal chassis not only offers strength and stability but also a sleek, professional appearance that enhances the overall aesthetic of the model car. Ideal for creating custom vehicles or modifying existing ones, this chassis kit provides a solid foundation for incorporating various components such as motors, batteries, and steering mechanisms. Its versatile design makes it suitable for a wide range of applications, from educational projects to competitive racing models. Overall, the Invento Chassis Sheet 4 Wheel Car Kit is an excellent choice for those seeking a high-quality, durable, and adaptable platform for their model car building endeavors. Its combination of strength, precision, and ease of use ensures a rewarding experience for both novice and experienced builders alike.

Voltage : 6-12 V

Type of Product : Parts & Accessories

Sheet Thickness : 0.65 mm

Chassis Material : Steel (Powder Coated)

Chasis Dimension : 260x130x45mm

Shaft Diameter : 6 mm

Wheel Diameter : 70

Torque Range : 5 Kg-cm

Explore other Variants (18)

Ships within 6 days

Invento 2 Wheel Car Kit Metal Chassis 130x105x45mm + 100 RPM DC Motor Wheel Robot Smart Car ISC 1590-D

By Invento

Pack of 1 kit

₹1,120 - ₹1,297

The Invento 2 Wheel Car Kit ISC 1590-D offers an exceptional foundation for robotics enthusiasts and DIY hobbyists looking to build a versatile, smart car. This kit features a robust metal chassis measuring 130x105x45mm, ensuring durability and stability for various applications. The chassis is designed to provide a solid base for integrating components and customizing the robot’s functionality. The kit includes two high-quality 100 RPM DC motors, which deliver reliable and consistent performance for smooth and efficient movement. These motors are crucial for driving the wheels and ensuring precise control over the car’s direction and speed. The inclusion of two wheels, coupled with the metal chassis, facilitates a straightforward assembly process, making it accessible even for beginners. The Invento 2 Wheel Car Kit is ideal for educational purposes, offering a hands-on experience with basic robotics and automation. It allows users to explore fundamental concepts in electronics, mechanics, and programming. The kit is compatible with various sensors and control systems, providing ample opportunities for experimentation and innovation. Overall, the ISC 1590-D is a versatile and durable car kit that caters to both novice and experienced users. Whether for learning, prototyping, or personal projects, it offers a reliable and flexible platform to bring robotic designs to life.

Voltage : 6-12 V

Type of Product : Parts & Accessories

Sheet Thickness : 1 mm

Rpm : 100 RPM

Chassis Material : Steel (Powder Coated)

Chasis Dimension : 130x105x45mm

Shaft Diameter : 6 mm

Torque Range : 5 Kg-cm

Explore other Variants (4)

Ships within 6 days

Invento 2 Wheel Car Kit Metal Chassis 130x105x45mm + 150 RPM DC Motor Wheel Robot Smart Car ISC 1590-E

By Invento

Pack of 1 kit

₹1,120 - ₹1,297

The Invento 2 Wheel Car Kit is a versatile and compact robotic platform designed for hobbyists and educational projects. Featuring a robust metal chassis with dimensions of 130x105x45mm, this kit provides a stable and durable foundation for constructing various robotic applications. The metal chassis is precision-engineered to support a range of components, making it ideal for both beginner and advanced robotics enthusiasts. Equipped with two 150 RPM DC motors, the kit ensures reliable and efficient movement. These motors are specifically chosen to deliver consistent speed and torque, enabling smooth operation and control of the robotic vehicle. The kit includes durable wheels that are designed to handle diverse terrains, enhancing the car's mobility and performance. The Invento Car Kit also supports a range of electronic components, including sensors and controllers, allowing users to customize and expand their robotic projects. Its user-friendly design and comprehensive assembly instructions make it an excellent choice for educational purposes, helping users develop their understanding of robotics, electronics, and mechanical engineering. Whether used for building autonomous robots, remote-controlled vehicles, or for educational demonstrations, the Invento 2 Wheel Car Kit offers a flexible and practical solution. Its metal chassis and efficient DC motors provide a solid foundation for a wide range of robotics applications, making it a valuable addition to any tech enthusiast's toolkit.

Voltage : 6-12 V

Type of Product : Parts & Accessories

Sheet Thickness : 1 mm

Rpm : 150 RPM

Chassis Material : Steel (Powder Coated)

Chasis Dimension : 130x105x45mm

Shaft Diameter : 6 mm

Torque Range : 5 Kg-cm

Explore other Variants (4)

Previous Next

Page 1 of 12 results