Astral Adhesives Opaque White Waterproofing Super SBR Latex TRUBUILD - WPL 334

• TRUBUILD - WSL-334 (Super Latex) is a ready to use styrene butadiene latex used for high performance applications of repairs and water proofing. It is used for repairing of old construction like floor, beams slabs etc. and water proofing of toilets, kitchen, bathroom and terraces. It has excellent bonding strength for old to new concrete and to plaster.

APPLICATIONS

• The product is used for dierent concrete repair application like spalled concrete, stone work, plaster, steel and most of building materials. It is also used for water proofing of toilets, kitchen, bathroom and terraces to prevent leakage and dampness. It is used as a bond coat and bonding plaster to plaster concrete to concrete masonry to stone work for plastering over brick masonry. It is for repairs of plaster cracks more than 5 mm in gaps of masonry and RCC substrate. It is used to coat rebar which prevents corrosion.

ADVANTAGES

• TRUBUILD - WPL 334 is a high quality concrete repair mortar that is used for the repairing and restoration of concrete structures and masonry walls. It is free from chloride content. It prevents corrosion. This single component product is easy to use due to its low viscosity.
• TRUBUILD - WPL 334 has excellent bonding on various substrates like concrete, masonry, stone work, plasters, and most of the building materials. It prevents cracking, improves hardness & Flexural strength and prevents dust generation.
• TRUBUILD - WPL 334 is 100% water proof after curing for 24 hours at ambient temperature and has good resistance against chemicals like acids & alkalies.

Renders & Patch repairing Mortar

• For render and patching repair mortar application following quantities are to be mix (Cement: 50 kg, Sand: 150 kg, Trubuild WSL 334: 5 Ls & Water: 15 lit).
•  Mix 5 Ls of Trubuild WSL 334 with 15 Ls water.
• Use this mix to make mortar with cement & sand.
• Wet the crack completely.
•  Apply a single coat of Trubuild WSL 334 prior to crack filling

Waterproof or Repair Plaster

• For water proof or repair plaster following quantities are to be mix (Cement: 50 kg, Sand: 150 kg, Trubuild WSL 334: 1 L & Water: 20 lit).
•  Mix 1 L of Trubuild WSL 334 with 20 L of water.
•  Use this mix to make mortar with cement & sand.
•  Final layer of plaster must not be mixed with Trubuild WSL 334.
•  Trubuild CPS should be added in the final layer of plaster.

Restrictions On Use

• Not recommended for use in very critical concrete repairs.
• Strictly do not dilute beyond recommendation.
• To be applied over damp substrate but surface should be touch dry.
• Waterproof coats must be protected with screeds/plaster