Dr Fixit 301 Pidicrete URP 1 kg

Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

Standard Compliance / Specification
Meets the requirements of BS 6319 part 2:1983 & ASTM C 190-85 standards

Areas of Application

• For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc.
• For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies
• As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering
• For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding
• As external rendering – Weatherproof & frost resistant render
• As bonding slurry coat for pinhole treatment on concrete surface

Features & Benefits

• Multipurpose – It is multipurpose & economical product, easy to use
• Cracking – It prevents cracking by improving flexural strength
• Hardness – Improves the hardness & prevents dust generation
• Shrinkage – Reduces drying & aging shrinkage cracks
• Bonding – Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces
• Erosion & corrosion – Improves erosion resistance & prevents corrosion
• Abrasion resistance – Improves abrasion resistance of the cement mix
• Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding

Method of Application

• SURFACE PREPARATION
  • Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents
  • Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at least 10 mm to avoid featheredging & to provide strong bond
  • Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting
  • For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application
• WATERPROOFING COATING
  • For a waterproofing coating Mix URP: Cement in the ratio 1:1.5 by volume
  • Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding cement to Dr. Fixit Pidicrete URP until the required consistency is achieved
  • Brush apply 2 coats of the mix in a span of 4-6 hours on the prepared concrete substrate
  • Overlay the coating with a protective screed to the desired slope & thickness
• BONDING PRIMER
  • For a bonding primer coat of Dr. Fixit Pidicrete URP mix URP: Cement in the ratio 1:1 by volume
  • Brush apply 1 continuous coat of the mix on the prepared concrete substrate
  • E nsure to overlay the repair mortar when the bond coat is still tacky
• REPAIR MORTARS & RENDERS
  • A suitable mix ratio for patching repair mortar or render is as follows:
  • Mix design - Portland Cement: 50 kg, Washed sand: 150 kg, Dr. Fixit Pidicrete URP: 6-7.5 kg & Water: 10 Lit
• FLOOR SCREEDS & PCC
  • A suitable mix ratio for patching repair mortar or render is as follows:
    • Mix design - Portland Cement: 50 kg, Washed sand: 75kg, 6mm downsize aggregates: 75 kg, Dr. Fixit Pidicrete URP: 6-7.5kg & Water: 10 Lit
• MIXING & APPLICATION
  • A forced action mixer is essential (PAN Mixer) & recommended to ensure that Dr. Fixit Pidicrete URP mortar is thoroughly mixed. Use a suitable sized drum with heavy-duty electrical drill machine fitted with spiral paddle mixer at slow speed of 400-500 rpm
  • Hand mixing is permissible only for 25 kg or less quantity
  • Charge the mixer with required quantity of clean & dry sand(or coarse aggregates as needed), cement & mix for 1-2 minutes, then add the recommended dosage of Dr. Fixit Pidicrete URP dispensed in water which is pre-batched. Mix for
  • 2-3 minutes to avoid air entrapment. Keep on slowly adding water until the required consistency is achieved

Dosage

• As a waterproofing coating – Mix proportion by volume; 1:1.5 (Dr. Fixit Pidicrete URP: Cement)
• As a mortar modifier – 10-15 % of Dr. Fixit Pidicrete URP by weight of cement
• As a bonding agent – Mix proportion by volume; 1:1 (Dr. Fixit Pidicrete URP: Cement)

Coverage

• As a waterproofing coating - 22 – 25 sq.ft./kg in 2 coats
• As a mortar modifier – 6-7.5 kg of Dr. Fixit Pidicrete URP per 50 kg of cement
• As a bonding agent – 45 – 50 sq.ft./kg per coat

Buy Dr Fixit 301 Pidicrete URP 1 kg online in India at wholesale rates. If you have been looking for Dr Fixit 301 Pidicrete URP 1 kg dealers, your search ends here as you can get the best Dr Fixit 301 Pidicrete URP 1 kg distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Dr Fixit 301 Pidicrete URP 1 kg of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Dr Fixit 301 Pidicrete URP 1 kg prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Dr Fixit 301 Pidicrete URP 1 kg rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Dr Fixit 301 Pidicrete URP 1 kg today and avail the best offers on your purchase.