Schneider PFXGP4301TADW Touch Panel 5.7 Inch

•  Maximum step length
• Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
• Maximum clock deviation
• Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec/month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.

 The front face of the GP unit, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification. Even though the GP unit's level of resistance is equivalent to these standards, oils that should have no effect on the GP can possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to the unit for long periods of time. If the GP's front face protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the GP and separate protection measures are suggested. Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic cover. Therefore, prior to installing the GP unit, be sure to confirm the type of conditions that will be present in the GP's operating environment. If the installation gasket is used for a long period of time,or if the unit and its gasket are removed from the panel

In addition to these precautions taken at installation time itself, we recommend that you always use high quality anti-corrosive lubricants such as SHELLSOL DTE 100 (for diesel engine oil) or SHELLSOL DTE 200 (for

 GP unit is designed to be installed at the wall that has a thickness of 40 mm [1.57 in.] or more. The installation wall thickness is outside of this range, the installation may warp. To prevent warping, the installation surface may need to be strengthened with a nail plate or similar device.

The actual dimensional tolerance of GP unit is +/-0 mm [+0.04/-0 in.] and R in angle is below R3 [R0.12 in.] at maximum. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

Buy Schneider PFXGP4301TADW Touch Panel 5.7 Inch online in India at wholesale rates. If you have been looking for Schneider PFXGP4301TADW Touch Panel 5.7 Inch dealers, your search ends here as you can get the best Schneider PFXGP4301TADW Touch Panel 5.7 Inch distributors in top cities such as Delhi NCR, Mumbai, Chennai, Bengaluru, Kolkata, Chennai, Pune, Jaipur, Hyderabad and Ahmedabad. You can purchase Schneider PFXGP4301TADW Touch Panel 5.7 Inch of the finest quality and rest assured to get the best in terms of both durability and performance. If you are bothered about the Schneider PFXGP4301TADW Touch Panel 5.7 Inch prices, you can be totally sure to get the best rates as Industrybuying brings you genuine Schneider PFXGP4301TADW Touch Panel 5.7 Inch rates and quality assured products only from the best of brands with exclusive brand discounts you won’t find anywhere else. Procure Schneider PFXGP4301TADW Touch Panel 5.7 Inch today and avail the best offers on your purchase.